ADAPTER 2 VALVES

Automatic, wire-based point monitoring.


System for detecting water leaks while automatically closing the water supply.
Water is detected by a wired sensor. In case of water leak, the unit will give an audible indication at the same time as it activates the solenoid valves, that closes off the water supply.
The Valve controller is designed in a way that ensures that the top outlet is not covered in a double plug-outlet. The valve controller ensures that the solenoid valve will not get stuck by motioning the pilot hole.

Product data sheet

APPLICATION AREA
For use in homes, holiday homes and commercial buildings.

MEASUREMENTS HxBxD (mm) Weight (g)
Valve controller WTG-36A 111 x 47 x 31 300

CONNECTIVITY
• 1 port for sensor cable
• 230V outlet for external equipment, max. power consumption 10A / 2,3kW

PACKAGE CONTENT
Valve control WTG-36A (wired system) Art.no. 5648321
Sensor tape flat, 3m Art.no. 5648223
Split cable for 2 valves Art.no. 5648199
Jack-adapter Art.no. 5648221
Valves in preferred dimensions
PRODUCT VARIANTS
Adapter 2 with power cut off 1/2” Art.no. 5648186
Adapter 2 with power cut off 3/4” Art.no. 5648561
Adapter 2 with power cut off 1” Art.no. 5648562
Adapter 2 with power cut off 1 1/4” Art.no. 5648563
Adapter 2 with power cut off 1 1/2” Art.no. 5648564
Adapter 2 with power cut off  2″ Art.no. 5648565
Adapter 2 m/with power cut off without valve Art.no. 5648566
NC systems
WG Adapter 2 with power cut off, NC 1/2” Art.no. 5648188
x
COMPLEMENTARY PRODUCTS
Sensor cable, 4 m. with plug Art.no. 5648228
Jack adapter for flat sensor tape Art.no.  5648221
Valve 3/4″ Art.no. 5640036
Valve 1″ Art.no. 5640537
Valve controller WTG-36A (wired system) Art.no. 5648588

Adapter with power supply